| Category | Parameter | Description |
|---|---|---|
Laser |
Compatible Laser Power | 10W / 20W / IR 3W |
| Laser Wavelength | 450nm typical (blue, Hiass/Osram source) /1064nm typical (red) | |
| Laser Type | Blue / Red | |
| Modulation Type | CW (Continuous Wave) / Red (pulse) | |
| Low-Power Blue Positioning Laser | Supported (10W, 20W) | |
| Crosshair Positioning Laser | Supported (IR 3W) | |
| Spot Size | 10W Diode — 0.03 × 0.03 mm 20W Diode — 0.1 × 0.15 mm 3W IR — 0.05 × 0.05 mm | |
Performance |
Max Working Speed | 600 mm/s |
| Max Acceleration | 20,000 mm/s² | |
| Max Working Area | 304.8 × 304.8 mm (12" × 12") | |
| Max Cutting Capacity | [See Max Cutting Capacity Table](/en/e1_series/Specifications) | |
Motion Control |
X-Axis Limit Detection | Dual-point detection on both sides |
| Y-Axis Home Position | Dual-point detection on both sides | |
| XY-Axis Motion Control | Max speed 600 mm/s, max acceleration 20,000 mm/s² | |
| Z-Axis Motion Control | Lift-to-home, rotary axis motion control | |
| R-Axis Motion Control | Independent R-axis interface | |
HMI & Controls |
Main Power Switch | Supported |
| Start/Pause Button | Supported | |
| Emergency Stop Button | Supported | |
| Breathing Indicator Light | Supported | |
| LED Lighting | Brightness and on/off controlled by the host software | |
| Buzzer | Status notifications | |
Connectivity & Ports |
Wi-Fi | 2.4G Wi-Fi, LAN connection (local communication only, no internet required) |
| Mini-B | ×2 (accessory ports) | |
| USB-A | ×1 (PC connection) | |
Detection & Safety |
Top Cover Detection (Hall sensor) | Open/close detection, auto lighting adjustment |
| Front Cover Detection (Hall sensor) | Open/close detection, auto lighting adjustment | |
| Flame Detection | AI camera auto-detection | |
Structure |
Laser Cooling Design | Integrated laser cooling and die heat dissipation |
| External Exhaust Fan | Bidirectional PIN connector | |
Smart Control |
Exhaust Fan Regulation | Auto-adjusts exhaust intensity based on engraving/cutting job, matching power and material |
| Air Pump Load Regulation | Auto-adjusts air pump output based on processing requirements | |
| Vibration Suppression | Initiated by the host software, suppresses processing vibration for improved accuracy | |
| Focusing Method | Auto-focus / Manual focus | |
| Note: The above smart control features are generally operated within the Aliencell Space software. | ||
Certifications |
Global Certifications | FDA, FCC ID, FCC SDOC, IC ID, RCM, SAA, UKCA, CE, EN60825, RoHs, EAC, TELCE, PSE |
Physical Specs |
Machine Weight | ≤ 14 kg (30.86 lbs) |
| Dimensions | 500×522.5×217mm（19.69" × 20.57" × 8.54"） | |
| Input Voltage | AC 100–240V, 50/60Hz | |
| Max Power Consumption | Compliant with power configuration requirements | |
Additional Ports |
Air Hose Connection | ×1 |
| Power Port | ×1 | |
| Rotary Axis Port | Built-in ×1 | |