To ensure your personal safety and the proper operation of this laser engraver, please read and follow the safety instructions below carefully before use.
- This product is classified as a Class 4 laser device. With the original protective cover properly installed and fully closed, it meets Class 1 safety standards.
- Never open the lid while the machine is operating to avoid laser exposure that may cause injury to your eyes or skin.
- Always wear certified laser protective goggles during operation.
- Do not look directly into the laser beam or its reflections, and never place hands or objects in the laser path.
- Keep the area around the machine free of flammable materials (such as paper, fabric, or sawdust) to prevent fire hazards.
- Avoid direct sunlight or frequent light fluctuations that may interfere with the flame detection sensor.
- Do not place any objects, especially heavy items, on the cover to avoid damage or sensor malfunction.
- Place the machine on a flat, stable surface to prevent shifting or vibration during operation.
- Ensure the protective lid is fully closed.
- Check that the air pump and exhaust system are properly connected and working.
- Make sure the material is placed flat and securely on the work surface.
- Confirm all sensor areas are unobstructed.
- Never leave the machine unattended while it is running.
- Stop operation immediately if you notice burning smells, unusual smoke, or abnormal noises.
- Do not touch the laser module or moving parts during X/Y-axis movement to avoid injury.
- Use a properly grounded power outlet that meets electrical safety requirements.
- Do not operate the machine in damp, wet, or explosive environments.
- Keep power and data cables intact, away from heat, sharp edges, or heavy loads.
- Always power off and unplug the machine before cleaning, maintenance, or part replacement.
- Do not attempt to modify or disassemble electrical components yourself.
- Always monitor the machine while it is operating.
- In case of smoke, fire, or other abnormalities, press the Emergency Stop button or disconnect the power immediately.
- Keep a suitable fire extinguisher (such as a CO₂ extinguisher) near the working area.
- If the machine malfunctions, stop using it and contact customer support. Do not attempt unauthorized repairs.