Warning: Do not power off the device, shut down the machine, or disconnect the network during the update process.
The Aliencell X1 supports offline firmware updates. See Local Firmware Update for details.
Release Date: Jun 1, 2026
Download: 📥 v1.0.74
- Added Crosshair Laser Calibration: Added a crosshair laser calibration entry in the Maintenance interface to help align the laser preview position with the actual processing position. For instructions, see X1 Red Crosshair Calibration.
- Optimized LightBurn Air Pump Control: LightBurn mode now supports automatic air pump control for cutting and engraving. The default mode is engraving. When Air Assist is enabled, the machine automatically switches to cutting mode. This feature requires the updated LightBurn configuration file. For setup instructions, see Use X1 with LightBurn.
- Fixed Localization Issues: Fixed multiple UI language and translation issues.
- Fixed Intermittent Issues: Fixed several intermittent bugs to improve system stability.
Release Date: Feb 6, 2026
Download: 📥 v1.0.65
- Fixed LightBurn Air Pump Issue: Fixed the issue where the air pump kept blowing in Auto mode after exiting LightBurn mode.
- Improved Processing Quality: Fixed speed control and laser power compensation logic to improve engraving and cutting results.
- Fixed Power-Off Resume: Fixed the issue where the power-off resume flag was not recorded and added calibration parameter saving when power loss occurs.
- Optimized Auto Focus: Improved auto-focus and probe retraction stability, and refined prompts for probe extension or retraction failures.
- Improved Safety: Automatically disables laser output when a motor stall or abnormal motor condition is detected.
- Fixed Pause and Homing Logic:
- Fixed the issue where the machine would not home after pausing with the lid open when lid detection is disabled or when a task starts.
- Fixed abnormal task status when the lid is opened during focusing.
- Added support for quick pause when the tray is open.
- Network and Connectivity:
- Fixed the issue where the IP address was not updated immediately when switching Wi-Fi networks.
- Fixed inconsistent Bluetooth connection status display for the air pump.
- System and UI Optimizations:
- Added a "Taking Photo" popup prompt.
- Fixed the issue where "Material Test" could get stuck on the loading screen.
- Fixed the internal storage list not refreshing after cancelling a task.
- Fixed the device unexpectedly entering sleep mode during the boot guide.
- Fixed possible system lag or restart caused by the air purifier when cancelling a task.
Release Date: Jan 15, 2026
Download: 📥 v1.0.59
- Added a tray detection switch.
- Optimized auto-focus logic to improve focusing accuracy and stability.
- Optimized Bluetooth communication logic to improve connection stability.
- Optimized Wi-Fi connection logic to improve connection success rate and reliability.
- Optimized automatic air pump control logic.
- Optimized automatic air purifier control logic.
- Optimized interaction logic when the lid is opened before a job is completed.
- Optimized crosshair laser positioning logic.
- Optimized positioning calibration accuracy and stability.
- Optimized power-off resume logic.
- Optimized photo brightness and distortion correction logic.